Energie effizienz
Wechsel richter sind für ihren hohen Wirkungsgrad bekannt, was bedeutet, dass sie Gleichstrom mit minimalem Energie verlust in Wechselstrom umwandeln können. Dies kann Ihnen Geld bei Ihren Energie kosten sparen und auch dazu beitragen, Ihren CO2-Fußabdruck zu verringern.
Sicher für empfindliche Elektronik
Wechsel richter erzeugen saubere und stabile Strom versorgung, wodurch sie mit empfindlichen elektronischen Geräten wie Computern, Smartphones und Fernsehgeräten sicher verwendet werden können. Dies ist wichtig, da viele elektronische Geräte empfindlich auf Spannungs-und Frequenz schwankungen reagieren, die sie beschädigen können.
Backup-Strom versorgung
Wechsel richter können bei Stroma us fällen als Backup-Stromquellen verwendet werden. Indem Sie sie an eine Batterie oder eine andere Gleichstrom quelle anschließen, können Sie Ihre wesentlichen Geräte und Geräte mit Strom versorgen, bis die Strom versorgung wieder läuft. Dies kann besonders bei Notfällen oder Natur katastrophen nützlich sein.
Table 1 Line Mode Specifications
INVERTER MODEL | 7.2KW | 8.2KW | 10.2KW | |
5put Voltage Waveform | Sinusoidal (utility or generator) | |||
Nominal Input Voltage | 230Vac | |||
Low Loss Voltage | 170Vac±7V (UPS); 90Vac±7V (Appliances) | |||
Low Loss Return Voltage | 180Vac±7V (UPS); 100Vac±7V (Appliances) | |||
High Loss Voltage | 280Vac±7V | |||
High Loss Return Voltage | 270Vac±7V | |||
Max AC Input Voltage | 300Vac | |||
Nominal Input Frequency | 50Hz / 60Hz (Auto detection) | |||
Low Loss Frequency | 40±lHz | |||
Low Loss Return Frequency | 42±lHz | |||
High Loss Frequency | 65±lHz | |||
High Loss Return Frequency | 63±lHz | |||
Output Short Circuit Protection | Circuit Breaker | |||
Efficiency (Line Mode) | >95% ( Rated R load, battery full charged ) | |||
Transfer Time | 10ms typical (UPS); 20ms typical (Appliances) | |||
Output power derating: When AC input voltage drops to 170V, the output power will be derated. | ||||
Table 2 Inverter Mode Specifications
INVERTER MODEL | 7.2KW | 8.2KW | 10.2KW |
Rated Output Power | 7.2KW | 8.2KW | 10.2KW |
Output Voltage Waveform | Pure Sine Wave | ||
Output Voltage Regulation | 230Vac±5% | ||
Output Frequency | 50Hz | ||
Peak Efficiency | 93% | ||
Overload Protection | 3s@>150% load;5s@101%~150% load | ||
Surge Capacity | 2* rated power for 5 seconds | ||
Nominal DC Input Voltage | 48Vdc | ||
Cold Start Voltage | 46.0Vdc | ||
Low DC Warning Voltage | |||
@ load < 50% | 44.0Vdc | ||
@ load > 50% | 42.0Vdc | ||
Low DC Warning Return Voltage | |||
@ load < 50% | 45.0Vdc | ||
@ load > 50% | 44.0Vdc | ||
Low DC Cut-off Voltage | |||
@ load < 50% | 41.0Vdc | ||
@ load > 50% | 40.0Vdc | ||
High DC Recovery Voltage | 62Vdc | ||
High DC Cut-off Voltage | 63Vdc | ||
No Load Power Consumption | 60W | 70W | 75W |
Table 3 Two Load Output Power
INVERTER MODEL | 7.2KW | 8.2KW | 10.2KW |
Full Load | 7200W | 8200W | 10200W |
Maximum Main Load | 7200W | 8200W | 10200W |
Maximum Second Load(battery model) | 2400W | 2733W | 3400W |
Main Load Cut Off Voltage | 44VDC | ||
Main Load Return Voltage | 48VDC |
Table 4 Charge Mode Specifications
Utility Charging Mode | ||||||||
INVERTER MODEL | 7.2KW | 8.2KW | 10.2KW | |||||
Charging Algorithm | 3-Step | |||||||
AC Charging Current (Max) | 140Amp | 140Amp | 160Amp | |||||
Bulk Charging Voltage | Flooded Battery | 58.4 | ||||||
AGM / Gel Battery | 56.4 | |||||||
Floating Charging Voltage | 54Vdc | |||||||
Charging Curve | ||||||||
MPPT Solar Charging Mode | ||||||||
INVERTER MODEL | 7.2KW | 8.2KW | 10.2KW | |||||
Max. PV Array Power | 8200W | 10200W | ||||||
Nominal PV Voltage | 360Vdc | |||||||
PV Array MPPT Voltage Range | 90Vdc~500Vdc | |||||||
Max. PV Array Open Circuit Voltage | 500Vdc | |||||||
Max Charging Current (AC charger plus solar charger) | 160Amp | 160Amp | 180Amp |
Table 5 Grid-Tie Operation
INVERTER MODEL | 7.2KW | 8.2KW | 10.2KW |
Nominal Output Voltage | 220/230/240 VAC | ||
Feed-in Grid Voltage Range | 195-253VAC | ||
Feed-in Grid Frequency Range | 49-51 ±lHz/59~61±1 Hz | ||
Nominal Output Current | 31.3A | 35.6A | 44.3A |
Power Factor Range | >0.99 | ||
Maximum Conversion Efficiency (DC/AC) | 98% |
Table 6 General Specifications
INVERTER MODEL | 7.2KW | 8.2KW | 10.2KW |
Safety Certification | CE | ||
Operating Temperature Range | -10°C to 50°C | ||
Storage temperature | -15°C~ 60°C | ||
Humidity | 5% to 95% Relative Humidity (Non-condensing) | ||
Dimension (D*W*H), mm | 537*390*130 | ||
Net Weighty kg | 14.2 | 14.2 | 14.5 |